 Opal Lighting supplied all the light fittings for this project in Brisbane  Surface mounted downlight custom made for this job - also note the tiny recessed downlight on the right  Same space by night - pretty cool  A cosy space upstairs   The soon to be opened Charming Squire Façade  All lights supplied by Opal Lighting. Lighting design by Tim Barry - Architect: Collins and Turner  The Charming Squire - Fortitude Valley - Brisbane The kegs lit by Opal Lighting Following our contribution to the lighting with Opal Lighting at the James Squire micro brewery in Newcastle last year, Collins and Turner Architects has again used Opal Lighting and Lighting Designer Extraordinaire Tim Barry of Victor Churchill Butcher fame to dress up the soon to open James Squire under the Conference and Exhibition Centre - Brisbane, aptly named The Charming Squire. We will update you with more photos very soon.  James Squire Newcastle - Copper Lighting Channels by Opal Lighting  Victor Churchill Butcher - Woollahra - Lighting Design by Tim Barry
0 Comments
 New CELLBoard, MILLBoard and INNOWOOD decking boards cohabit nicely on the Innowood Designex 2014 Stand. Opal Lighting provided linear LED profiles (Piccolo) and Tubo 7W Track fittings as well as LED spikes to bring the exhibit to life. Come and see us over the next two days at the new Glebe Island Exhibition Centre. It is a very confutable venue thanks to lots of natural light and very effective HVAC.    
We are delighted to announce that Archinterface will be on the stand of INNOWOOd for DESIGNEX 2014. We are also very happy to have convinced Opal Lighting to provide the lighting for the stand. So please come and see some fantastic new (and older...) composite extrusions and panel, including the amazing CELLBoard, as well as a range of interior and exterior LED light fittings and LED fluoro replacement tubes from OPTILED. See you on STAND 270 from the 28th to 30th of May. 
Five large ceiling panels made out of Innowood battens, as well smaller intermediate smaller features across the width of the mall have been installed at the Mirvac Stanhope Village Shopping Centre in Sydney North West. One of the ceiling panels over the children playground includes Opal Lighting RGB strip lights controlled by a Lutron HomeWorks QS. A great synergy between three of Archinterface clients and a happy customer from Mirvac. We are currently doing another job for Mirvac on the Sunshine Coast with the same sort of Innowood profiles. Completion is due in June.
 This is the newest member of the Genesis family from Opal Lighting, with the same characteristics as the other products in the family, but now also available in the very warm 2700K colour temperature.
We currently carry stock of the 2700K and 3000K versions. It is slightly more expensive than our unbeatable other Genesis products, but still very competitive. Call us for samples. Mirvac and Ignite Architects choose Innowood, Opal Lighting and Lutron for Stanhope Village9/8/2013 
Ceiling features out of Innowood battens, incorporating lighting LED profiles from Opal Lighting controlled by Lutron
Archinterface has been instrumental in securing a large installation of Innowood products for the upgrade of the Mirvac shopping Centre at Stanhope Village.
Subsequently, Opal Lighting and Lutron were specified for the animated lighting feature over the new playground area. These products were chosen for their low maintenance, suitability of purpose and affordability. The client was also interested in having Innowood acting as primary subcontractor to supply and install the whole project within a very tight schedule  From the Sydney Opera House to the Museum of Contemporary Arts, Sydney was awash with amazing lights and sounds. A record crowd attended braving the rain which at time was torrential. It was all good fun and The Milky Way attracted its fair share of attention with people coming all the way from France to admire it! 
The Milky Way @ VIVID in full blast with visitors from across the Globe!
The Milky Way @ VIVID in a dimmer state...
 The Milky Way is under construction in a - secret - warehouse in Ultimo.
The 300 crates have been prepared for the hanging cables, the LED strips supplied by Opal Lighting are being wired up (after a memorable soldering lesson on Wednesday night: you can see Thomas trying his hand to it under the my watchful eye and Jason fiddling around with the control gear...) The last two nights were dedicated to - successfully - implement the DALI ESN module from LUTRON kindly supplied by Convergent Technologies. So we can expect about 80 crates to be ready and functional by the end of the week-end! Great team work!  The Milky Way light installation at Vivid 2013 The website for this amazing project is now live at http://www.themilkywayvivid.com
Go and have a look and discover the team, the project genesis and get the latest news from "The Milk Bar" blog. Fascinating! And obviously we expect to see you in Kendall Lane from the 24th of May and up until June 10th.  In an effort to help reduce waste of space and transport costs, as well as reducing our carbon footprint, we are trying to have all our brochures as downloadable documents from our website by the end of the first quarter of 2013.
You can already download the following brochures from the appropriate page on our site: LUTRON: Grafik-Eye QS brochure HomeWorks QS brochure Quantum brochure Fabrics selection brochure for Sivoia and Serena Shades OPAL LIGHTING: Lighting Profiles drawings LED Luminaires ITLAS: Full brochure on Engineered Floor Boards Full brochure on Engineered Parquet system TACCHI: Full brochure on metal fabrics |
AuthorJean-Marie LIERE has spent all his professional life in consultative selling, 
Categories
All
Archives
April 2016
|
RSS Feed
Sitemap
|
Follow us on: |
Archinterface Pty LtdGPO Box 2051
Sydney NSW 2001 Australia Phone + 61 40 41 070 42 Web www.archinterface.com.au Email [email protected] Instagram @archinterface |